table extention

[RODDY]

Im thinking of adding a table extention to the right of the blade.
2 3/4 mdf to fill the rail to the end
so do you guys think it would bend the fence rails?
or do i have to support it if i did that?
I hope not
has any 1 experance a bent fence? with the 3650?

[skipsax]

Roddy,
Much has been discussed regarding this when adding a router extension to the right. The short answer is it's best to support the rails. I did it based on Bob D's design. Just search for "table extension" in the threads.

Let me know if you have trouble finding the thread in the search.
Skip

[Rafael]

Why take a chance? Two 1x1's with levelers from the extension to the floor would give you enough support. They're cheap and easy to make.

[hewood]

Better to support it than to not....even if the rails don't bend, the saw could tip with enough downward weight applied.

[wwsmith]

I with the fellows above. I would much rather be safe than sorry.

[RODDY]

well I add a table extention made out of wood and mdf
I skipped the extra support and it seems to be very stable any way
(I just got Lazy)
some one here did this and I just copied it
thanks to who ever did before me and posting a pic of it
any way here is some pics of it

(jan28 weeken)
http://community.webshots.com/user/rodthibault