Tool Hanger

[sparky1945]

There are certain tools that are nice to have handy when using your table saw. I made this tool hanger and attached it the front of my TS3650. I used 1 1/2" x 3/16" flat bar and peg board hangers. I drilled holes to match the hangers and welded them to the flat bar and ground off what was sticking through the back. I then changed out the existing leg bolts for longer ones to attach the hanger to the saw.

[Dust Dawg]

Very Nice Sparky,

Where did you get the matching Ridgid Orange Paint? Custom mix or spray can?

[sparky1945]

Thanks Dust Dawg, The paint came from Home Depot, Its spray paint "American's Finest" brand and the color is popsicle Orange.
Dan