niki
02-11-2008, 10:21 AM
Good day
I don't have planer (jointer) and when I have to make the "glue line" for panel glue-up, I'm using the router with straight edge like many others.
But, I don't like all the measuring so I made some small locating blocks that helps me to position and clamp the straight edge in seconds and I like to share it with you.
The bad news is, that you have to make separate pair for every bit diameter (I'm using usually 10 mm bit).
Regards
niki
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J01.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J02.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J03mm.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J04.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J05mm.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J06mm.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J07.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J08.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J09.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J10.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J11.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J12.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J13.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J14mm.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J15.jpg
I don't have planer (jointer) and when I have to make the "glue line" for panel glue-up, I'm using the router with straight edge like many others.
But, I don't like all the measuring so I made some small locating blocks that helps me to position and clamp the straight edge in seconds and I like to share it with you.
The bad news is, that you have to make separate pair for every bit diameter (I'm using usually 10 mm bit).
Regards
niki
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J01.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J02.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J03mm.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J04.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J05mm.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J06mm.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J07.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J08.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J09.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J10.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J11.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J12.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J13.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J14mm.jpg
http://i158.photobucket.com/albums/t104/nanikami/Jointing%20with%20hand%20router/J15.jpg