PDA

View Full Version : Just Got The Ts3650

SAWDUSTOFNC
02-22-2008, 04:17 PM
Took A Day To Put It Together After Taking Lots Of Breaks, NOW IF I CAN FIGURE OUT HOW TO UPLOAD PICTURES
BadgerDave
02-22-2008, 05:47 PM
Congrats on the new table saw and welcome to the group.
funeralguy82
02-22-2008, 06:03 PM
I just put mine together a week ago... good luck with the saw!!!
hewood
02-22-2008, 07:01 PM
Super! Now's the time to make sure you "optimize" it and get the most out of it.

- at the very least, put a couple of coats of paste wax on the surface.
- get the fence to blade alignment spot on
- make sure the belt tension and pulley alignment are on
- use stock blade for questionable wood, but buy a high quality blade or two for your primary precision work.
- get or make a zero clearance insert
- consider making a crosscut sled and/or buying an aftermarket miter gauge
Davet
02-22-2008, 07:41 PM
Here's a thread that may help with posting pictures

http://www.ridgidforum.com/forum/showthread.php?t=8145&highlight=upload

Gentlemen, do we have a help file for posting pictures?
I looked but could not find one in the FAQ section.