PDA

View Full Version : Ridgid Jointer

TommyAfrica
03-12-2008, 10:21 AM
Anyone out there have an opinion of the Ridgid jointer .Is there a comparable alternative .I'm looking spend $400 or less
BadgerDave
03-12-2008, 10:47 AM
In the price range you mentioned, the Ridgid jointer ranks right up near the top of the list.
FINER9998
03-12-2008, 11:36 AM
i have the ridgid jointer. it works very well and has handled everything i've thrown at it. you won't find a better tool for rabbetting. and don't forget the LLSA.
smelly
03-13-2008, 06:16 AM
LLSA? :confused:
BadgerDave
03-13-2008, 08:45 AM
LLSA? :confused:

If you own any Ridgid tools you should read this. (http://www.ridgid.com/Tools/Power-Tool-Warranty/)
hewood
03-13-2008, 09:02 AM
The Ridgid jointer is a solid design, and typically well liked. The wide base makes it a bit more difficult to put on a mobile base, but there are aftermarket options available.

There are comparable alternatives from Jet (http://www.amazon.com/JET-708457K-JJ-6CSX-Horsepower-230-Volt/dp/B00006ANS5/ref=pd_bbs_sr_2?ie=UTF8&s=hi&qid=1205417232&sr=8-2), Grizzly (http://grizzly.com/products/6-x-46-Jointer/G0654) has two (http://grizzly.com/products/6-Jointer/G0452), Delta, Sunhill (http://sunhillmachinery.com/SM-150%20Jointer.htm), Rikon (http://woodcraft.com/tab/001.aspx), and Craftsman. Sale prices fluctuate...most get near your budget. Some offer full enclosures, wheels, and/or stem mounted switches. Some are slightly wider, and/or a bit taller. Check out as many as you can and go with whichever makes sense to you....all should do a good job.