View Full Version : No clean outs sewer location tip
Hershall
03-16-2008, 05:52 AM
I use my k3800 hooked to my sonde to locate sewer lines. But when there is not a cleanout I have to pull a toilet. Is there another way to get my sonde through the toilet with out pulling it?
Ace Sewer
03-16-2008, 06:10 AM
no
gear junkie
03-16-2008, 07:29 AM
Get a flushable sonde or go through the vent.
PLUMBER RICK
03-16-2008, 11:13 AM
Get a flushable sonde or go through the vent.
i've used flushable sondes in the past and sometimes they don't pull back as the string will snag and break.
the vent would be the easiest if you use a fiberglass push rod.
there are no cleanouts anywhere on the property? even a 2'' sink c/o?
rick.
Hershall
03-16-2008, 01:24 PM
i've used flushable sondes in the past and sometimes they don't pull back as the string will snag and break.
the vent would be the easiest if you use a fiberglass push rod.
there are no cleanouts anywhere on the property? even a 2'' sink c/o?
rick.
CORRECT! No cleanout anywhere.
:eek:
I see this on many older homes in Phoenix. If they do have clean outs they were added after the fact.
Hershall
03-17-2008, 10:58 AM
Thanks guys. I will get a flushable sonde. I do not have a fiber glass push rod and I have hualed my drain snake up there before....... that is touch to do!
:)
westcoastplumber
03-17-2008, 06:58 PM
why would a handyman need to locate a sewer or drain??
Hershall
03-18-2008, 07:49 AM
The guy wants to add a cleanout. The house currently does not have one clean out.
So he can take work from licensed plumbers.
Regards
Tony
vBulletin® v3.7.2, Copyright ©2000-2008, Jelsoft Enterprises Ltd.