align ts3650

[kpanaro]

I just got the 3650, the blade is out 1 degree from 90, the bottom is kicked out. Now comes the hard part, in order to align the blade should i 'move the rear or front trunnion? also where should i 'tap' the trunnion to adjust this & not knock the whole thing out? Any suggestions or tips?
keith

[sawhorse75]

Check page 43. I believe you need to adjust the stop screw, not the trunnions.

http://www.ridgid.com/ASSETS/C4A23357031F4B34B574FB17FADF8ED6/TS3650_402_eng.pdf