Paste Wax?

[imported_KC]

I am in the process of setting up the 3650 and it says to degrease the table and then apply a coat of paste wax. I got some Minwax Paste Finishing Wax, is that the paste wax they are talking about? The reason I ask is because it only mentions wood finishing on the label.

[ 01-28-2004, 06:10 PM: Message edited by: KC ]

[woodworkerjake]

Any paste wax that does not contain silicone is fine. I always hear Johnson paste wax. IT's a furniture wax. I believe that Miniwax is the same category of wax.

Jake

[Bob S]

Check down a few threads, "what should I use..."

[ 01-28-2004, 09:00 PM: Message edited by: Bob S ]

[spacebluesonoma]

SPEND the 12 bucks and get some bostick topcote

[slipriwenwet]

I used auto wax paste myself. Some for the saw, some for the car.

[Mark IV]

Use the Minwax, works great. Read the rest of Dave's Dirty Dozen (http://www.woodworkersweb.com/kb.php?mode=article&k=10) and do it.
:cool:
Some of the auto pastes contain silicone, which transfers to and ruins good wood.

[imported_Ronnie Clement]

I use beeswax and it works great. I wax all my jigs for my saws as well. If you would blow on them they would slide across the saw.