My Jetter tried to kill me

[All Clear Sewer]

I was called out to a job that I use to use my K-7500 on. I thought I`d try the jetter as it`s a real hard place to get to. You have to back about a 1/4 mile down a little path covered with trees.
Well I had to work about 20` from the C/O`s as a tree had fallen right on the path.
I pulled a little to much hose out of the C/O when I was back jetting and it took off like a Rocket! I liked to crap my pants ducking the hose while it was in flight.
Damn thing was trying to get me before I could get it shut down.....rotflmao :killingme:
http://www.hotboatpics.com/pics/data/500/15497062308_1500_00_.jpg

http://www.hotboatpics.com/pics/data/500/15497062308_1501_00_.jpg

http://www.hotboatpics.com/pics/data/500/15497062308_1501_01_.jpg

[Service Guy]

You got a little cocky pulling the nozzle back didn't ya? "A little more, a little more, ok water is spraying out of the cleanout now, but I'll pull back just a little more."....:D
Anyway, glad you didn't get hurt.

[ToUtahNow]

It's times like that which makes you considered adding a remote reel set up.

Mark :rolleyes:

[Josh]

did it blast the needles off that tree in the pics? glad you didnt get hurt :p

[JCsPlumbing]

Lucky. There was someone that worked for one of the Municipalities that got killed from there truck jetter. Same thing as what happened to you. Those jets for the cities are big chunks of metal on the end of a whip.

And I think he was wearing a hard hat. You might have to do some Googling but it's true.

Anyway, glad you're ok. And a great reminder to us all of when we get on that edge of safe, but we're trying to get done, to slow down and be able to go home.

J.C.

[PLUMBER RICK]

you really need a bright orange leader hose. a remote control shut off, a foot valve, a high pressure ball valve or a helper.

try painting/ taping some bright colors on the last 10' or so of your hose.

i made a remote control shut off for my big jetter that i can control from 200' away.

my smaller jetters i use a foot valve or a spray wand.

all my hoses are properly marked for footage and safety.

rick.

[All Clear Sewer]

You got a little cocky pulling the nozzle back didn't ya? "A little more, a little more, ok water is spraying out of the cleanout now, but I'll pull back just a little more."....:D
Anyway, glad you didn't get hurt.

YEP that's just what I did but next time I think I`ll just say "That`s enough" :rolleyes:

[MrsSeatDown]

you really need a bright orange leader hose. a remote control shut off, a foot valve, a high pressure ball valve or a helper.

try painting/ taping some bright colors on the last 10' or so of your hose.

i made a remote control shut off for my big jetter that i can control from 200' away.

my smaller jetters i use a foot valve or a spray wand.

all my hoses are properly marked for footage and safety.

rick.

And you are glad he didn't get hurt, right Rick?

[All Clear Sewer]

did it blast the needles off that tree in the pics? glad you didnt get hurt :p
Yep I had a truck full of em. I drank down my Ice Tea and found a few had went down my straw that was setting in the truck cab....lol

[Woussko]

I'm glad you didn't get whipped bad with the flying hose. They hit hard and dig in. YEEEEEOUCH is a mass understatement.

Anyway, Rick has a great idea of the bright color leader hose. If not that, then some way to color code the last 5 or 10 feet.

This reminds me of a painter that had the hose bust on his pressure washer. Let's just say I heard a few words that I don't think I've ever heard before. He just took off running as the hose whipped all over the place. Finally someone (Police officer in the area) took a shot with a 30_06 rifle and shot the tip of the spark plug off. Engine stopped. The *&^%$#@ came to an end and while there was property damage, no one was hurt other than in ego.

================================================== ==================================================
Please post a few pics of the tree as it is now. We would love to see it.

[All Clear Sewer]

It was really strange how it all went down (or) OFF if you may ;)

I saw it pop out of the C/O and started to reach for the water cut-off, it was like slow motion. I heard a noise and looked up as it just missed my head by inches. I started to run then heard it hitting the truck like a hammer. I ducked down real low in a full run (( Like that was gonna do something...lol )) Dove inside the back of the truck and hit the key and grabbed the water cut off lever at the same time. Seem like it took for ever but I bet it didn't....lol
I remember it laying on the ground before it took flight and didn't think much about it other then shut it off but it took flight and I was lost after that..... Wild stuff I tell ya, wild stuff.
You never stop learning if your working ;)

[All Clear Sewer]

Please post a few pics of the tree as it is now. We would love to see it.
I didn't get any after I moved the truck, sorry never thought about it.Would have been a cool picture ;)
I was just glad that I had all my windows :D

[HouseOfAtlas]

Glad you are okay! That must've been one hell of a scare. What type of jetter were you using (specs??)

[All Clear Sewer]

We`v been working on getting the real specs but it was to be a 3000PSI @ 7GPM

[PLUMBER RICK]

We`v been working on getting the real specs but it was to be a 3000PSI @ 7GPM

according to a published formula,

h.p. required =(psi x gpm / 1100) gas engine #'s

3,000 x 7 = 21,000/ 1,100= 19.09 h.p:eek:

2,500 x 7 = 17,500/ 1,100= 15.9h.p.;)

rick.

[Cuda]

ROTFL Rick quotes the specs from the old thread again lol.

[All Clear Sewer]

yep he did and they are still way off as there's a lot more to it then that ;)

[PLUMBER RICK]

yep he did and they are still way off as there's a lot more to it then that ;)

look who's laughing now:nyaa-nyaa4::killingme:

rick.

[All Clear Sewer]

I am,
all the way to the bank every time I use it :killingme:
So http://www.ridgidforum.com/forum/images/smilies2/nyaa-nyaa4.gif

And your way off with your figures too :killingme:

[PLUMBER RICK]

I am,
all the way to the bank every time I use it :killingme:
So :nyaa-nyaa4:

And your way off with your figures too:killingme:

even better as that formula came from the other ebay seller you didn't buy from:killingme:i told you they were published #'s:D

you get what you pay for:rolleyes:

as i recall, i told you your numbers were way off:nono:

by the way, that formula is very, very, close;)

rick.

[All Clear Sewer]

funny you say that Rick as they work together...... :killingme:

If your so good at the numbers game tell me what PSI I have at the real with the 2650 @ 7GPM nozzle set up I`m running now??? I have the RED Spring on the unloader ;)

I hope to have the RPM numbers tomorrow but I can tell you that we are both way off with the equipment that I`m using to test everything. I mean way off!!!!

Looks like I might have the wrong pump and it`s doing crazy things. The builder is working to try and help figure out what went wrong with the build of this unit.

I`m thinking a bigger motor and this thing may be a killer set-up if it`s the wrong pump?????

[ToUtahNow]

funny you say that Rick as they work together...... :killingme:

If your so good at the numbers game tell me what PSI I have at the real with the 2650 @ 7GPM nozzle set up I`m running now??? I have the RED Spring on the unloader ;)

I hope to have the RPM numbers tomorrow but I can tell you that we are both way off with the equipment that I`m using to test everything. I mean way off!!!!

Looks like I might have the wrong pump and it`s doing crazy things. The builder is working to try and help figure out what went wrong with the build of this unit.

I`m thinking a bigger motor and this thing may be a killer set-up if it`s the wrong pump?????

It seems like this debate has been going on forever so I wonder why the "builder" can't give you a decent answer already.

Mark

[All Clear Sewer]

A debate with Rick will go on forever ;) You should know that ;)

I`ve been wondering the same thing so we started testing a few things.
So far all the builder can come up with is it might have the wrong pump on it??? After I get all the info then we will know one way or the other. It`s hard to be the tester and do my work at the same time so I have to do a little at a time. I thought he sent me the wrong nozzles but that`s not the case so we have to figure out if the pump is mismarked???

All I know is it`s not right or even close to right but it will fly through the air like a rocket :eek:

[JCsPlumbing]

What's funny to me is that ACS appears to be asking for assistance:help: but then wants to argue about it.

He should post in the "Ask The Plumbing Experts Section"

J.C.

P.S.

I'm nicknaming him Last Word as he MUST have it.:rolleyes:

[All Clear Sewer]

I dont think I asked for any assistance in this topic and if I did I`m sure it would be over your head ;)


what are you doing down here anyway? Trying to learn from the sewer guy`s?
Go back to the Plumbing Experts Section and talk more crap on the guy`s that havent taken the masters test yet. Remember, we are all hacks down here ;)
Move along, nothing to see here :D

For a new guy on the forum you sure work fast J.C ;)

[PLUMBER RICK]

A debate with Rick will go on forever ;) You should know that ;)



there is no debate. i told you when you first bought your jetter from ebay that the numbers didn't add up.

you never having owned 1 jetter disagreed. myself owning 8 or more (lost count) know from experience that 16 h.p will only deliver so much psi and so much gpm. you can't have it both. but if i were to chose one over the other, i would take higher gpm over higher psi.

as mark said, let the guy who sold you the machine figure it out. you're not the only one he sold this too. he overrated the specs and is not going to give you 3000# at 7 gpm with that engine.

rick.

[All Clear Sewer]

I`m thinking this guy needs to be paying me for my time as he`s the builder, not me...lol

I found a Honda 18hp and I`m thinking I may have to do an engine change and figure out how to slow the GPM down. I have way to much GPM as it`s always dumping back in to the tank running the nozzles he sent me. He say`s the nozzles are right but something has to be wrong with that much water bypassing????

[ToUtahNow]

I`m thinking this guy needs to be paying me for my time as he`s the builder, not me...lol

I found a Honda 18hp and I`m thinking I may have to do an engine change and figure out how to slow the GPM down. I have way to much GPM as it`s always dumping back in to the tank running the nozzles he sent me. He say`s the nozzles are right but something has to be wrong with that much water bypassing????

I agree anyone can bolt components together but I assume you bought from this guy on his representation. If he is selling these jetters with the wrong specs how is anyone suppose to compare apples to apples.

Mark

[ToUtahNow]

I dont think I asked for any assistance in this topic and if I did I`m sure it would be over your head ;)


what are you doing down here anyway? Trying to learn from the sewer guy`s?
Go back to the Plumbing Experts Section and talk more crap on the guy`s that havent taken the masters test yet. Remember, we are all hacks down here ;)
Move along, nothing to see here :D

For a new guy on the forum you sure work fast J.C ;)

Too bad we don't have a thumbs down because this post would have earned some.

Mark :nono:

BTW: Your daily post count is 2.31 while his is 5.92. At this rate before too long you will both have the same total post count.

[PLUMBER RICK]

I`m thinking this guy needs to be paying me for my time as he`s the builder, not me...lol

I found a Honda 18hp and I`m thinking I may have to do an engine change and figure out how to slow the GPM down. I have way to much GPM as it`s always dumping back in to the tank running the nozzles he sent me. He say`s the nozzles are right but something has to be wrong with that much water bypassing????

slowing down the gpm's is as easy as slowing down the rpm's.

i always set my rpms by watching the psi. once i max out my psi, i stop advancing the throttle.

rick.

[PLUMBER RICK]

Too bad we don't have a thumbs down because this post would have earned some.

Mark :nono:

:ThumbsDown::ThumbsDown::ThumbsDown::ThumbsDown::T humbsDown::ThumbsDown::ThumbsDown::ThumbsDown:
:ThumbsDown::ThumbsDown::ThumbsDown:

i just gave you some for the future.

rick.

[ToUtahNow]

I just went back and found the thread from when you bought your jetter

http://67.212.161.167/~bennettf/forum/showthread.php?t=12932&highlight=jetter

Maybe I am missing something but I think Rick's numbers are correct. You posted your jetter is 2600 psi at 7 gpm and you have a 16 hp Honda. Rick's math is 2,500 psi x 7 gpm = 17,500/ 1,100= 15.9h.p. which is pretty close.

Mark

[JCsPlumbing]

I dont think I asked for any assistance in this topic and if I did I`m sure it would be over your head ;)


what are you doing down here anyway? Trying to learn from the sewer guy`s?
Go back to the Plumbing Experts Section and talk more crap on the guy`s that havent taken the masters test yet. Remember, we are all hacks down here ;)
Move along, nothing to see here :D

For a new guy on the forum you sure work fast J.C ;)

Not asking for any assistance? You're not asking Rick for any assistance? I could have missed something.:o

Then what are you doing?

I'm definitely trying to learn from ALL the guys on the forum. I don't believe your a hack. But I also believe you would probably fail any plumbing inspection every time for awhile. :)

For an old guy on the forum you sure work slow to admit you're wrong.

Rick's right. :grin:

J.C.

[All Clear Sewer]

No where in this topic did I ask Rick or anyone for any assistance!

What am I doing you ask???
I posted a few pictures of my jetter hose up in a tree above my truck. Thats it, just a little "Show-N-Tell"

Your "Best Insults" dont bother me J.C.

You are a post hore, you have nothing to add to this topic but yet your posting your little insults to try and make you fee better about your lack of knowledge on the subject.

Why dont you read back and show me where I asked for any assistance with a problem upon opening this topic.


You may want to check out this info to help your post count
http://www.albinoblacksheep.com/flash/posting

:groucho:

Ok,
in this topic J.C. I did ask Rick for assistance but he couldn`t read the mfg`s spec`s right even after I posted a picture of em ;) You once again were fast to reply (2nd post) with your silly little Insults :rolleyes:
Way to go J.C., you are the man when it comes to making a quick noninformative reply :thumbup2:
http://www.ridgidforum.com/forum/showthread.php?t=18488

:way-to-go:

[All Clear Sewer]

I just went back and found the thread from when you bought your jetter

http://67.212.161.167/~bennettf/forum/showthread.php?t=12932&highlight=jetter

Maybe I am missing something but I think Rick's numbers are correct. You posted your jetter is 2600 psi at 7 gpm and you have a 16 hp Honda. Rick's math is 2,500 psi x 7 gpm = 17,500/ 1,100= 15.9h.p. which is pretty close.

Mark
Mark those numbers are still way off ;)
With the new gage and the testing we are doing it`s not even close to being right. I have to see how many gallons I`m bypassing and at what rpm`s to figure our whats going on. This might have a 8gpm pump on it and if so thats the problem.

[Cuda]

Have you tried using a 10gpm tip? To see if that cuts down on the bypass. If a bigger tip helped you could have some custom tips made to 8GPM.

[All Clear Sewer]

It`s just getting to the fun part now as the builder stop calling me back :rolleyes:

I just checked and my 250` of 3/8 hose is only 195` :rolleyes:

[Gene Bickford]

Whats this guys seller ID on Ebay?
Sounds like a good one to stay away from.

[ToUtahNow]

It`s just getting to the fun part now as the builder stop calling me back :rolleyes:

I just checked and my 250` of 3/8 hose is only 195` :rolleyes:

I think you may be on to something. It sounds like he exaggerates everything by 22%. :thumbup2:

Mark

[JCsPlumbing]

No where in this topic did I ask Rick or anyone for any assistance!

What am I doing you ask???
I posted a few pictures of my jetter hose up in a tree above my truck. Thats it, just a little "Show-N-Tell"

Your "Best Insults" dont bother me J.C.

You are a post hore, you have nothing to add to this topic but yet your posting your little insults to try and make you fee better about your lack of knowledge on the subject.

Why dont you read back and show me where I asked for any assistance with a problem upon opening this topic.


You may want to check out this info to help your post count
http://www.albinoblacksheep.com/flash/posting

:groucho:

Ok,
in this topic J.C. I did ask Rick for assistance but he couldn`t read the mfg`s spec`s right even after I posted a picture of em ;) You once again were fast to reply (2nd post) with your silly little Insults :rolleyes:
Way to go J.C., you are the man when it comes to making a quick noninformative reply :thumbup2:
http://www.ridgidforum.com/forum/showthread.php?t=18488

:way-to-go:


How did I insult you? :confused: I thought you were asking for assistance and I was right just as you posted? You just seem very argumentative about whatever Rick or someone tells you. Don't know why.

I also told you I was glad you came out ok from your "flying jetter whip" but maybe that was also uninformative. :rolleyes:

I definitely know very little on jetters and learn from everyone.

On a final note, "whore" is with a w. If you don't believe me ask Rick. :p

J.C.

[MrsSeatDown]

On a final note, "whore" is with a w. If you don't believe me ask Rick. :p

J.C.

JC-this is where you went wrong. NEVER ask Rick for spelling advice. He only spells correctly because of his smart wife:D

[JCsPlumbing]

:o Sorry. :o But I think you knew what I was getting at. ;)

J.C.

[MrsSeatDown]

:o Sorry. :o But I think you knew what I was getting at. ;)

J.C.

I was just lightening the mood:love2:

[JCsPlumbing]

Gettin' the love. :love2: Feeling the flow. :canoodle:

J.C.

[All Clear Sewer]

How did I insult you? :confused:
Really? I didn't know. Maybe we can all put in a request to Josh to give them their own section. Maybe just above the Spanish one. :rotflmao:

J.C.I thought you were asking for assistance and I was right just as you posted? You just seem very argumentative about whatever Rick or someone tells you. Don't know why.
Show me in this Topic where I asked for assistance :shrug:



On a final note, "whore" is with a w. If you don't believe me ask Rick. :p

J.C.

Sorry I don't type all that well and some times I even type the wrong words as I find myself typing what I`m saying to someone at the same time... :killingme:
it`s hard being in the office talking and typing at the same time :D
I run everything through spell check just for you ;)
And I see, you are still post whoring <--- is that better ??? :killingme:

[JCsPlumbing]

Much better. :clapping: Now educate me a little. Exactly what is this "post whoring"?

And maybe I misunderstood. You don't need assistance with your jetter system. There are no posts about it anywhere on the forum. My mistake.

Finally, a challenge for you. Let's start a poll of who the regular forum members would rather have stay.

JCsPlumbing vs. All Clear Sewer. Loser leaves for life.

Just make sure all voters state they voted in the thread. No "mystery" votes. They don't have to state who they voted for either. Leave it up for a few days and we go with the results.

Then you might get rid of me for the long haul and not have any "post whoring"? Could we have Josh block the losers IP address where they couldn't even get on with a new name? That's ok with me.

Wouldn't that be great if you win. Then you could talk about drum vs. sectional. Or the jetter you don't have problems with. Or drum vs. sectional. Or the jetter you don't have problems with. Or drum vs. sectional. Or the jetter you don't have problems with. Or.....:rotflmao1:

What do you say?

J.C.

[ToUtahNow]

Much better. :clapping: Now educate me a little. Exactly what is this "post whoring"?

And maybe I misunderstood. You don't need assistance with your jetter system. There are no posts about it anywhere on the forum. My mistake.

Finally, a challenge for you. Let's start a poll of who the regular forum members would rather have stay.

JCsPlumbing vs. All Clear Sewer. Loser leaves for life.

Just make sure all voters state they voted in the thread. No "mystery" votes. They don't have to state who they voted for either. Leave it up for a few days and we go with the results.

Then you might get rid of me for the long haul and not have any "post whoring"? Could we have Josh block the losers IP address where they couldn't even get on with a new name? That's ok with me.

Wouldn't that be great if you win. Then you could talk about drum vs. sectional. Or the jetter you don't have problems with. Or drum vs. sectional. Or the jetter you don't have problems with. Or drum vs. sectional. Or the jetter you don't have problems with. Or.....:rotflmao1:

What do you say?

J.C.

Wouldn't it just be easier if everyone got along? I'd miss both of you guys as you both contribute.

Mark :itsover:

:icon_bike:

[All Clear Sewer]

Oh my, you really are an idiot
Do you think this forum is based on a popularity contest?
Get over yourself :itsover:

[JCsPlumbing]

Nope. Don't think any forum is based on a popularity contest.

OK if members would rather have me leave for life also for "post whoring". Can you handle it?

J.C.

[MrsSeatDown]

Nope. Don't think any forum is based on a popularity contest.

OK if members would rather have me leave for life also for "post whoring". Can you handle it?

J.C.

This is soooooo ridiculous. Besides, Rick is the post whore king. I have proof-he has the most posts!

Are we all done know?:deadhorse:

[gear junkie]

Having talked to both of you, I think you're too much alike. I would miss you both if you left. Who would antagonize Rick or Devine if you left? You both like to poke fun, let's leave it at that. Maybe it's because you're both so much alike that you know exactly what to say to the other to tick him off.

Or if the making up thing doesn't work, you guys could fight at the next roundup.:killingme:Just kidding, Rick would probably want to challenge the winner.

[JCsPlumbing]

A fight to the end for milkshakes!:)

J.C.

[MrsSeatDown]

A fight to the end for milkshakes!:)

J.C.

Oh no! Rick will do anything for a milkshake:smack-head: It doesn't even have to be made with clean materials:D

[All Clear Sewer]

Nope. Don't think any forum is based on a popularity contest.

OK if members would rather have me leave for life also for "post whoring". Can you handle it?

J.C.

I couldn't give two shits what you do J.C.
If you want to leave, that's up to you. Don't do it on my account.
I myself haven't found any of the post that you have made that I have read, useful to anyone? I`m not saying you haven't made any useful post, it`s just that I haven't seen any of em????
You seem to be offended by a guy like me that has been successful in what I do. Get over it, life goes on. If you only knew 1/2 of what I really do or have done you would wonder why I`m even wasting my time to reply to someone like you. I`m even wondering that myself :smack-head:

Tell me about yourself so I can try and understand what your about ;)

I`ll even give you a rundown on where and what I`m about ;)
Then maybe you`ll understand me a little better????

[JCsPlumbing]

I couldn't give two shits what you do J.C.
If you want to leave, that's up to you. Don't do it on my account.
I myself haven't found any of the post that you have made that I have read, useful to anyone? I`m not saying you haven't made any useful post, it`s just that I haven't seen any of em????
You seem to be offended by a guy like me that has been successful in what I do. Get over it, life goes on. If you only knew 1/2 of what I really do or have done you would wonder why I`m even wasting my time to reply to someone like you. I`m even wondering that myself :smack-head:

Tell me about yourself so I can try and understand what your about ;)

I`ll even give you a rundown on where and what I`m about ;)
Then maybe you`ll understand me a little better????

I definitely don't want to leave the forum. But I was thinking maybe you're right and I was "post whoring" and screwing up the forum. Or maybe you were screwing it up some... so let the masses decide.

Maybe I haven't made a useful post. I'll try to make less or better ones. If I'm not voted off the island. :D

I champion success for all good people! :) Makes me happy when they are succeeding.

If you know twice+ what I do, why are you responding to someone like me? :rolleyes:

Maybe we just can't learn from each other. :eek:

I don't need or want to know anything else about you. Or you me because as you stated you know twice+ what I do.

If you're living an ethical life, wish you nothing but success. :thumbup:

J.C.

P.S. "Can you handle it?" meant can you handle leaving for life? :)

[Service Guy]

What is this preschooler stuff, I thought you were both grown men?:smack-head:

[MrsSeatDown]

What is this preschooler stuff, I thought you were both grown men?:smack-head:

Shhhh! I just made popcorn:killingme:

[Service Guy]

Shhhh! I just made popcorn:killingme:

Well, All-clear has logged out, so you better watch a movie instead.:p

[ToUtahNow]

I believe it would be "voted out of the supply house" rather than "voted off the island". However, as you know the bylaws of the "Smelly Old Plumbers and Drain Cleaners" prevents such votes so you guys will have to learn to tolerate each other.

Mark

[JCsPlumbing]

How 'bout 12" Ridgid Pipe Wrenches from 20 paces? :lol:

Not the sissy aluminum ones either.

J.C.

[Drain Medic]

Someone seperate these 2 boys....Oh wait, they arent my kids fighting this time :D

[Cuda]

Well I vote for .....:grin:

[gear junkie]

Oh well, I tried.

[All Clear Sewer]

What is this preschooler stuff, I thought you were both grown men?:smack-head:I am just growing older by the day
and there's nothing I can do about my age :shrug:
but I refuse to grow up :nyaa-nyaa4:

[HouseOfAtlas]

All Clear and Rick,

Sorry for starting this argument. It seems like the whole thing started when I asked for specs. I was just curious since I will probably end up buying one in the future and just wondering what type All Clear had.

Again, sorry about this :(

[gear junkie]

No need to apologize for other peoples inadequacies in life.






















Steve, that was a joke. J.C. I figure you know that's a joke.

[JCsPlumbing]

B. Already PM'ed Atlas saying I wasn't too happy about our behavior.

;)

J.C.

[PLUMBER RICK]

All Clear and Rick,

Sorry for starting this argument. It seems like the whole thing started when I asked for specs. I was just curious since I will probably end up buying one in the future and just wondering what type All Clear had.

Again, sorry about this :(

just p.m. me for advise on this when it's time to go shopping. stay away from ebay unless you trust others:D

rick.

[All Clear Sewer]

The E bayer is sending me a box of parts to try out. I`m not gonna count em out just yet but time will only tell and I will post his info if he doesn't make things right 100%


BTW.... Hey Rick, oop`s I did it again,
The NEW K-7500 will be here next week some time :nyaa-nyaa4:
I`ll post pictures of it so you can remember what a new one looks like :killingme:
My cable came through the guide tube today :eek: ....rotflmao
It was time even if it`s only a few years old ;)

[ToUtahNow]

The NEW K-7500 will be here next week some time :nyaa-nyaa4:


Boy it is about time. With the volume you do you were crazy for not having a backup machine.

Mark

[All Clear Sewer]

I know, it`s just hard to turn loose of the money when I have already spent so much this year.
I never thought I did that much work but from what others are telling me I guess I must do alot more then I was thinking.
I always thought a machine would last 5 to 10 years????
Maybe I need to slow down :shrug:

[ToUtahNow]

I know, it`s just hard to turn loose of the money when I have already spent so much this year.
I never thought I did that much work but from what others are telling me I guess I must do alot more then I was thinking.
I always thought a machine would last 5 to 10 years????
Maybe I need to slow down :shrug:

Of course when your machine is the life of your business you can't be without one. An example is you are a racer yet I doubt you would head to the race without some spare parts.

Mark

[All Clear Sewer]

We have a trailer full of parts ;)
Good Point ;)

[PLUMBER RICK]

The E bayer is sending me a box of parts to try out. I`m not gonna count em out just yet but time will only tell and I will post his info if he doesn't make things right 100%


BTW.... Hey Rick, oop`s I did it again,
The NEW K-7500 will be here next week some time :nyaa-nyaa4:
I`ll post pictures of it so you can remember what a new one looks like :killingme:
My cable came through the guide tube today :eek: ....rotflmao
It was time even if it`s only a few years old ;)


remember who your talking to.

i have both a brand new 7500 and 750 still in the box.
along with a new k-60 that's only mixed up 1 milkshake.

then there are still the used 750's and 7500, spartan 300, and a couple of general drum machines all sitting idle.

amazing what a k-60,k-1500 and k-50 replaced.

so save your pictures as i would run out of film snapping all my spare tools.


p.s. it's about time you spent $2500. on a tool that makes you money.

rick.

[JERRYMAC]

SHOULD OF BROUGHT A TROJAN STALLION

http://www.trojantoolmfg.com/

[ToUtahNow]

SHOULD OF BROUGHT A TROJAN STALLION

I hate to say it but to the un-indoctrinated they may think you are talking about birth control. You may want to help out with a link.

Mark

[MrsSeatDown]

I hate to say it but to the un-indoctrinated they may think you are talking about birth control. You may want to help out with a link.

Mark

How ironic this came from you:rolleyes:

[All Clear Sewer]

SHOULD OF BROUGHT A TROJAN STALLION
Why`s it better then the 7500?