View Full Version : Where's Our Sewer Machine Girl?
All Clear Sewer
07-02-2008, 10:02 PM
Does she check in here?
I`ve got a few things I`d like to ask her ;)
ToUtahNow
07-02-2008, 10:19 PM
Does she check in here?
I`ve got a few things I`d like to ask her ;)
There is a link on the forum home page for all of the forum leaders. Renee is listed for drain cleaning and there is a link to PM her and a link to email her. I would say either of those two methods would be the fastest way to get her attention.
Mark
gear junkie
07-02-2008, 10:21 PM
All the Ridgid folks visit the forum to see what we're talking about. After all, we are their R&D dept. Chances are your thread will be read if you post it for the rest of us. Renee, the drain cleaning product manager, probably won't read it since she figures you're whining about brushes or how ridgid cable sucks or something else. LOL just kidding Sensitive Steve.
All Clear Sewer
07-02-2008, 10:27 PM
Ben
I just had an Idea on the feeder tube on the K-7500 for her to think over.
I think they are made out of 095 wall mild steal and was wondering if they ever thought about using 125 wall Chrome Molly?
Might make em last a little longer for us guys that only do one sewer a day :killingme:
Killertoiletspider
07-02-2008, 11:00 PM
Ben
I just had an Idea on the feeder tube on the K-7500 for her to think over.
I think they are made out of 095 wall mild steal and was wondering if they ever thought about using 125 wall Chrome Molly?
Might make em last a little longer for us guys that only do one sewer a day :killingme:
That would be a large monetary upgrade to pay for the tooling to make it.
PLUMBER RICK
07-03-2008, 12:50 AM
i have her #;)
it's a sectional thing:love:
rick.
All Clear Sewer
07-03-2008, 09:37 AM
That would be a large monetary upgrade to pay for the tooling to make it.
You don't have to change any tooling. We use it in our roll cages and we use the same dies to bend it as we do the 095 wall.
HouseOfAtlas
07-03-2008, 06:30 PM
i have her #;)
it's a sectional thing:love:
rick.
LOL! :lmao:
papadan
07-04-2008, 06:09 PM
i have her #;)
it's a sectional thing:love:
rick.
Now we know she wont respond to this thread.:D
Renee
07-08-2008, 04:37 PM
Hey Guys!
How are you all? I am on the forum most days but dont get a chance to read every post :(
I am always ready to hear any feedback, good or bad or answer any questions.
Hope all is well
Renee
07-08-2008, 04:39 PM
Plumber Rick,
I think you may have me confused with Matt (sectional guy), you know I am drum machine girl.:grin:
All Clear Sewer
07-08-2008, 06:36 PM
Plumber Rick,
you know I am drum machine girl.:grin:
I think I`m in LOVE :p
Now about that feeder tube ;)
plumberscrack
07-08-2008, 06:37 PM
Hey Guys!
How are you all? I am on the forum most days but dont get a chance to read every post :(
I am always ready to hear any feedback, good or bad or answer any questions.
Hope all is well
I have a question Renee....
Why can't I send you a private message?
I get this error message:
Renee has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.
Did you block me? :shocked:
I guess my question wasn't that important anyway :(
All Clear Sewer
07-08-2008, 06:38 PM
She`s one of us and you cant have her ;)
She blocked you because all sectional users are blocked :killingme:
plumberscrack
07-08-2008, 06:48 PM
She`s one of us and you cant have her ;)
She blocked you because all sectional users are blocked :killingme:
I just so happens that my question was about using the drum adapter on the K-60.
What does that make me? :scratchhead:
gear junkie
07-08-2008, 06:52 PM
I don't get that message, I guess she must not like you guys.
plumberscrack
07-08-2008, 07:01 PM
I don't get that message, I guess she must not like you guys.
:crying::crying::crying::crying:
All Clear Sewer
07-08-2008, 07:12 PM
I just so happens that my question was about using the drum adapter on the K-60.
What does that make me? :scratchhead:
A Cross Dresser :killingme:
gear junkie
07-08-2008, 07:16 PM
i have her #;)
it's a sectional thing:love:
rick.Not funny
A Cross Dresser :killingme:Funny, Rick are you taking notes?
plumberscrack
07-08-2008, 07:31 PM
A Cross Dresser :killingme:
I've been called worse things :p
MrsSeatDown
07-08-2008, 08:13 PM
Not funny
Funny, Rick are you taking notes?
You want him to read and take notes? He can barely listen and take notes:turtle:
MrsSeatDown
07-08-2008, 09:34 PM
Plumber Rick,
I think you may have me confused with Matt (sectional guy), you know I am drum machine girl.:grin:
Rick, doesn't she have to return the super secret cutting heads now that she turned traitor?:nyaa-nyaa4:
I think Matt's mom is still waiting for him at Nordstrom's:lol:
PLUMBER RICK
07-08-2008, 10:42 PM
Plumber Rick,
I think you may have me confused with Matt (sectional guy), you know I am drum machine girl.:grin:
renee, now that i know this, i guess i can take my 3 k-750's and 2-k7500's out of the closet and get back to business;)
or i can keep them there and matt and i can go get pedicures and shop at nordstroms.
matt, got any plans this weekend? i'm free:D
ps. those super secret cutters i gave you are for sectional's only:p
ToUtahNow
07-08-2008, 10:58 PM
Rick, doesn't she have to return the super secret cutting heads now that she turned traitor?:nyaa-nyaa4:
I think Matt's mom is still waiting for him at Nordstrom's:lol:
Matt sure jumped when they called him over the PA system.
Mark
MrsSeatDown
07-08-2008, 11:05 PM
I have a question Renee....
Why can't I send you a private message?
I get this error message:
Renee has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.
Did you block me? :shocked:
I guess my question wasn't that important anyway :(
I sent her a pm no problem:confused: Maybe she knows crack kills:eek:
Plumber Rick,
I think you may have me confused with Matt (sectional guy), you know I am drum machine girl.:grin:
O no not another drum I`m becoming depressed.
Tony
vBulletin® v3.7.4, Copyright ©2000-2008, Jelsoft Enterprises Ltd.