jo0610 blade orientation

[Laflaone]

I just bought a used jointer. I hope this doesn't sound like a stupid question, but I am unsure of the way the 3 blades should be faced in the cutterhead. I ask this question, because the manual does not show it, and who knows what the previous owner did. The cutterhead rotates towards the infeed table. Should the flat side of the blade cut into the wood first, or the beveled side?

[FINER9998]

here is the manual:
http://www.ridgid.com/ASSETS/43B3AEA4D4614701A2E2385F30753C61/JP06101_393_eng.pdf

check page 29. there is a drwaing of the blades sitting in the cutter head.

[Laflaone]

Finer,

Thanks for your relply. It was helpful.