ddandre
10-26-2008, 09:28 PM
Just purchased this pump and installed today. Nothing wrong with the other pump other than it was 10 years old. Figured I would buy the best. Come to find out that the pump cycles too quickly. When water entering the pit, the water level does not even get to the top of the pump when the pump cycles. Also the pump runs too long. I feel the issue is with this new wave sensor, although it may be the "new thing", it is not working in my case. The way this pump cycles, it will burn out in no time.
Question - can the sensor be removed and placed elswhere in the pit given there is not adjustment on the pump.
Question - can the sensor be changed out for a pressure sensor and/or traditional float sensor?
I like the 1hp and the pumps ability to "empty the pit quickly" however, During a rain storm, the pump turns on every 20 seconds as the pit only fills up to about 10 inches or so then the pump turns on. The pump is louder then it should be and the 1 to 2 second grind at the end of the cycle is loud to. If the sensor can be moved and/or a different sensor installed as I had in the past, this pump would be viable, otherwise I think It will be going back, and if they will not take it back, it will make the garbage.
Any help would be appreciated.
Question - can the sensor be removed and placed elswhere in the pit given there is not adjustment on the pump.
Question - can the sensor be changed out for a pressure sensor and/or traditional float sensor?
I like the 1hp and the pumps ability to "empty the pit quickly" however, During a rain storm, the pump turns on every 20 seconds as the pit only fills up to about 10 inches or so then the pump turns on. The pump is louder then it should be and the 1 to 2 second grind at the end of the cycle is loud to. If the sensor can be moved and/or a different sensor installed as I had in the past, this pump would be viable, otherwise I think It will be going back, and if they will not take it back, it will make the garbage.
Any help would be appreciated.