Ridgid TS2424 -3612 Fence Rod For Sale

[Big Johnson]

If any one is interested, I am going to sell my retrofit parts for my TS2424LS since I now have a router table... They have been on the saw for a few months and are in perfect condition...

The parts you will get to convert your saw from a 24"x24" to 36"x12" or to just add another rod to your existing saw are as follows:
1.) Qty.1, Rod Support. (827583)
2.) Qty.2, Plate Support. (827585)
3.) Qty.2, Screw, Socket Set 10-32 x 7/16. (141669-35)
4.) Washer Shims. (818309)

This is what went in place of the rod: http://www.ridgid.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=001344

If anyone is interested let me know... I will let it go for $10.00 plus Shipping... I think I paid a little over $20.00 from Ridgid... I can ship cheap...
http://home.neb.rr.com/iambigjohnson/Big%20Johnson/TS2424%20Fence/5.jpg

http://home.neb.rr.com/iambigjohnson/Big%20Johnson/TS2424%20Fence/2.jpg

[ 04-18-2003, 03:49 PM: Message edited by: Big Johnson ]

[john_n]

Big Johnson, Was planning on adding these parts to my saw anyway. Saw your post here and am interested. I will send you a PM with my adress and other info. Thanks.

[Big Johnson]

john_n,
First off, welcome to the forum... smile.gif

I sent you e-mail...

[john_n]

Thanks Big J, Glad you had those parts, and glad I could help offset the cost of your new rt, if only just a bit. Might have a few ?'s to post here on the forum when I have more time, but until then, this is a good start. smile.gif