JP06100 Table Sag

[Will Stanley]

The infeed and outfeed tables both need minor adjustment. The outfeed table in particular needs raising on the far end. Does anyone know how to get the two tables coplaner?

[imported_wbrooks]

Do the Gibb adjustment on page 25 of the owners manual

JP610 manual (http://www.ridgid.com/CatalogDocs/jp0610_6442_eng.pdf)

If that does not do it call tech support 1-866-539-1710 you may have an improperly machined table or base dovetail

[Will Stanley]

Thanks,

After I made the original post, I went through the gib adjustment again and that cleared up the problem.