ActNowDrain
02-14-2003, 09:33 AM
Folks,
I purchased a k-3800 new with 1/2 X 90 cable C-46.
I'm impressed with the machine. It appears it could handle bigger jobs than I expected.
One of the reasons I purchased this machine was to
solve the 2" laundry line ( or sink ) that runs 50-60 feet. In a test I realize that the 1/2 cable is too stiff to negotiate a 2" trap. I believe that
purchasing 3/8" C-32 will solve this.
Also I need advice on the Ridgid part number for an
additional drum for the 3800. I would like to just swap out drums as needed. Is #55002 correct?
It says its a A-380 which is confusing me
Any advice would be appreciated. Sometimes the hardest blockage is one that occurs in a 1 1/2 or 2" line that runs a long distance > 50'
Thanks in advance.
I purchased a k-3800 new with 1/2 X 90 cable C-46.
I'm impressed with the machine. It appears it could handle bigger jobs than I expected.
One of the reasons I purchased this machine was to
solve the 2" laundry line ( or sink ) that runs 50-60 feet. In a test I realize that the 1/2 cable is too stiff to negotiate a 2" trap. I believe that
purchasing 3/8" C-32 will solve this.
Also I need advice on the Ridgid part number for an
additional drum for the 3800. I would like to just swap out drums as needed. Is #55002 correct?
It says its a A-380 which is confusing me
Any advice would be appreciated. Sometimes the hardest blockage is one that occurs in a 1 1/2 or 2" line that runs a long distance > 50'
Thanks in advance.