Announcement Announcement Module
Collapse
No announcement yet.
Router Table For The 3612 Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Router Table For The 3612

    Anybody know of a router table to fit the space between the fence rails on the right side of a 3612?

  • #2
    The Craftsman router tables that are designed to fit a Craftsman table saw mount without a hitch. I have the Craftsman Professional Table Saw Routing Extension, and the part number at least in Canada, is 092 973 769.

    Comment


    • #3
      Pretty much any TS router table wing that is 27" deep (contractor saw size) can be adapted with a little drilling and hardware. Mine bares the Powermatic name and uses the JessEm Rout-R-Lift system that also bares the Powermatic name.
      It was part of a complete system, but I just bought the router table wing and lift. I did add a set of home made legs to the outside to better hold the weight. And I added to the left side of the table and left the cast iron wing on as well for really large saw top. All in all, took me about 6 hours to build/drill/mount the whole thing and about 20 bucks in hardware and reinforcment metel.
      Wish I could do web pages, would love to be able to post some picks so you could some ideas.
      John E. Adams<br /><a href=\"http://www.woodys-workshop.com\" target=\"_blank\">www.woodys-workshop.com</a>

      Comment


      • #4
        My saw is a TS2424, I bought it as a floor model last summer before the 3612 was introduced. As a nice bonus, it had been retrofitted with the 36" rip adaptor kit. So I already had rails to which I could mount the router table, without removing the wing. As per UO-Woody, it makes for a nice big saw top.

        I need to add legs, so as not to damage the rails. Any tips on a sturdy, light weight setup?

        Comment


        • #5
          Woody...send them to me and I'll put them on my web page...

          woodcat@ev1.net

          We've been discussing this on the 2400 rip fence question thread here...

          http://www.ridgid.com/cgi-bin/ultima...c;f=7;t=000253

          [ 01-23-2003, 03:13 PM: Message edited by: KellyC ]
          Kelly C. Hanna<br /><a href=\"http://www.hannawoodworks.com\" target=\"_blank\">Hanna Woodworks</a>

          Comment


          • #6
            I can also post some pics for you Woody. Heck, I do graphics (including web pages) for a living so I have some server space if needed.

            Michael

            Comment


            • #7
              Hey guys, appreciate the offer.
              Wish I had looked back here sooner.
              Been spending the last few weeks learning the very basic of things using FrontPage, and I still have nothing but troubles. My isp set me up with some space but have run into some problems with them. So I purchased some space and domain name.
              There is some pics of the table saw at www.tucker-usa.com/users/redwolf1.
              But it won't be there for very long, it will all be moved to www.woodys-workshop.com
              Any suggestions on how to get the pics that don't show in the RAS Cab #2 pictorials to show would be most welcome!

              [ 01-23-2003, 08:12 PM: Message edited by: UO_Woody ]
              John E. Adams<br /><a href=\"http://www.woodys-workshop.com\" target=\"_blank\">www.woodys-workshop.com</a>

              Comment


              • #8
                Front Page. Ugh. Like pulling teeth go do web design.

                Make sure your pics in the RAS pictorial are in the correct directory and then make sure your links to them are accurate. Sometimes it's just a better idea to reload them.

                Sorry for the hijacked thread. Back to your regularly scheduled program.

                Michael

                Comment


                • #9
                  haha, easier said than done I'm affraid, I still not sure how got what I got on the site. I still don't have a clue what I'm doing!
                  on the site the pics point to a place on my computer, and I don't have a clue on how to change it.
                  John E. Adams<br /><a href=\"http://www.woodys-workshop.com\" target=\"_blank\">www.woodys-workshop.com</a>

                  Comment


                  • #10
                    You don't have the pics on the server? They should be there and not on your computer.

                    I'll check the source on your page and see what's up.

                    Can I get your email so we don't clog the list?

                    Michael

                    Comment


                    • #11
                      Woody...how did you make and what's the router table wing made of?
                      Kelly C. Hanna<br /><a href=\"http://www.hannawoodworks.com\" target=\"_blank\">Hanna Woodworks</a>

                      Comment


                      • #12
                        Been busy as a beaver, www.woodys-workshop.com is up, but is very sad shape as trial and erroring things to be the final output. All pics are now on the server and there is a link to "Email Woody".
                        Once the site gets it's looks and going I can return to the shop and take photo's and update what's there. I can also get some more of the project pictorials done in time. Since the wife has practically BARRED me from the shop until our new son is at least sleeping most all the way through the night: I'll be working the computer end of things for awhile. But be patient, it'll get there.
                        John E. Adams<br /><a href=\"http://www.woodys-workshop.com\" target=\"_blank\">www.woodys-workshop.com</a>

                        Comment


                        • #13
                          Gotcha...first things first....how's the little feller doin'?
                          Kelly C. Hanna<br /><a href=\"http://www.hannawoodworks.com\" target=\"_blank\">Hanna Woodworks</a>

                          Comment


                          • #14
                            He's a fussy little guy, got colic I'm affraid.
                            Sleep deprivation?
                            Anyways, the router table itself is made of multi layered MDF and I bought it at a local woodworking place. Woodsoarce in Grand Rapids, MI. Not sure if they have a web site or not. It's part of a powermatic system. Might look at powermatic site to see if they offer the beast there, least they should. The lift has thier name on it to. One of these days if I ever see the inside of my shop again I'll take the saw apart and do a pictorial on the table wing on the right and the router table on the left and get a pictorial up on my site showing how it's all done. In hopes it will help out so many that are asking for these kind of additions.
                            He's fussin again....ear plugs anyone?
                            John E. Adams<br /><a href=\"http://www.woodys-workshop.com\" target=\"_blank\">www.woodys-workshop.com</a>

                            Comment

                            Working...
                            X