Announcement

Collapse
No announcement yet.

13" planer dust collection

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 13" planer dust collection

    ok, call me crazy but i can NOT find a place to buy a 4" dust collection hose adapter for my 13" ridgid planer. Does anyone know where to buy this attacment? please PLEASE let me know.

  • #2
    Your planer did not come with the adapter to connect to your DC? I thought that all of the TP1300 came with it.
    info for all: http://www.hoistman.com http://www.freeyabb.com/phpbb/index....wwtoolinfoforu --- "I like long walks, especially when they are taken by people who annoy me."

    Comment


    • #3
      NO, it didn't come with the part.... just the long, narrow, built-in dust vent above the blades. I bought the planer from the Home Depot (go figure) about a year and a half ago.

      Comment


      • #4
        The 4" is part of that adapter, I believe it is at the opposite end of the 2".
        Bill

        Comment


        • #5
          sorry, i'm not following that??

          Comment


          • #6
            On one end of the unit is the 2" hose connector, I believe it is inset somewhat. I believe either that whole unit, the 2" connector, is removeable or the other end is removeable, and that is the 4" connector. I'm at the office right now and can't get to my unit, but the bottom line is that the plastic end on one end comes off and that is the 4" connector.
            Bill

            Comment


            • #7
              OK if you have the black dust port adapter that is held on by 3 thumb screws then you have all there is. One side is 2" and the other end is 4". Pull the plug out of the 4" side and stick it into the 2" side. Does this make since?
              info for all: http://www.hoistman.com http://www.freeyabb.com/phpbb/index....wwtoolinfoforu --- "I like long walks, especially when they are taken by people who annoy me."

              Comment


              • #8
                i don't have the black dust port adapter. BUT, i found the part # and can order it from RIDGID. it was just a lot harder to find that it should have been......

                CHEERS!

                Comment


                • #9
                  I have an extra dust port adapter I can give you. I bought it not realizing that the planer shipped with one (in most cases [img]smile.gif[/img] . If you want it let me know. I'll send it to you, and you can send me a check for the cost of shipping after you receive it. I would think that shipping would be less than $4.

                  Comment

                  Working...
                  X