Announcement

Announcement Module
Collapse
No announcement yet.

Is it Moen?

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Is it Moen?

    Well, is it Moen?

    Thanks.

    J.C.
    Last edited by BobsPlumbing; 01-18-2010, 11:41 PM.

  • #2
    Re: Is it Moen?

    No

    Comment


    • #3
      Re: Is it Moen?

      uhhh i though it kind of looks like half a union, a bogus coupling and a male adapter, any other angles?

      Comment


      • #4
        Re: Is it Moen?

        It came off a three handle tub/shower valve with White Cross Handles. Less than 5 years old. No names on any part of the trim. Didn't have a camera to take a pic of the trim and I didn't have time to dismantle the valve.

        J.C.

        Comment


        • #5
          Re: Is it Moen?

          Originally posted by JCsPlumbing View Post
          Well, is it Moen?

          Thanks.

          J.C.
          That looks like a fairly generic union tail piece. Without a picture of the trim it would be tough to identify. I'm assuming the wall must be open to have been able to retrieve the piece?

          Mark
          "Somewhere a Village is Missing Twelve Idiots!" - Casey Anthony

          I never lost a cent on the jobs I didn't get!

          Comment


          • #6
            Re: Is it Moen?

            Couple of more pics. Need the union or have to replace the whole valve. It's not a universal type valve/union where you have sweat or threading options.

            Thanks.

            J.C.
            Last edited by BobsPlumbing; 01-18-2010, 11:41 PM.

            Comment


            • #7
              Re: Is it Moen?

              Looks like price pfister.

              Comment


              • #8
                Re: Is it Moen?

                Pretty good clarity & depth of field in my opinion. New Pentax on the lowest grade image it will take.

                My Panasonic point-shoot-work camera wouldn't give a decent close pic.

                J.C.

                Comment


                • #9
                  Re: Is it Moen?

                  You're not giving us much to go on here, JC

                  3 handle Moen tub/shower valves were never very popular, at least around here. I've only seen a few.

                  Did you notice if the stems were 1/4 turn, 3/4 turn or multi-turn?

                  Comment


                  • #10
                    Re: Is it Moen?

                    Originally posted by gusty60 View Post
                    Looks like price pfister.
                    Could be. I'll start poking around on their web site. Thanks.

                    Once again. No labels on the trim, tub spout, or valve in the back. And the showerhead had been changed to a Pollenex.

                    My world.

                    J.C.

                    Comment


                    • #11
                      Re: Is it Moen?

                      Originally posted by plumberscrack View Post
                      You're not giving us much to go on here, JC

                      3 handle Moen tub/shower valves were never very popular, at least around here. I've only seen a few.

                      Did you notice if the stems were 1/4 turn, 3/4 turn or multi-turn?
                      I'm wanting to say 1/4 turn. Was already late for something else & basically got it capped and the water on.

                      Didn't give a good inspection like I should have I guess.

                      J.C.

                      Comment


                      • #12
                        Re: Is it Moen?

                        If you end up going back to the site to better identify the valve take a PP tail piece with you because that would be my bet as well. We use to have boxes of their sweat tail piece on the trucks for doing repipes but I don't have anymore. Maybe someone here has either an new or old PP valve so they could take a picture of the tail piece for you to compare.

                        Mark
                        "Somewhere a Village is Missing Twelve Idiots!" - Casey Anthony

                        I never lost a cent on the jobs I didn't get!

                        Comment


                        • #13
                          Re: Is it Moen?

                          Quarter turn? I'm gunna say it's a Delta.
                          Part #RP6203 (coupling nut and tailpiece)

                          All the Price Pfister t/s valves I usually see are multi turn stems with washers.

                          Comment


                          • #14
                            Re: Is it Moen?

                            Talked to someone at PP. They told me to send them an email/pics and would tell me if it was theres. Waiting.

                            J.C.

                            Comment


                            • #15
                              Re: Is it Moen?

                              They emailed me back and said it looked like theirs. So maybe this can stay in the archives if someone needs it.

                              Information reported to me by Price Pfister:

                              Union-970-028
                              Nut-931-500

                              Support line-1-800-732-8238 as of this post.

                              No PP parts around here. My as well be trying to get a Pegasus cartridge.

                              Thanks forum folks.

                              J.C.

                              Comment

                              Working...
                              X