If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will be required to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The K-375 was replaced 2 years ago with the k-380. However all the parts for the 375 are still available. Including the drum. I'm not sure if you want the whole drum with all the hardware as an assembly or just the bare drum so I'll give you both numbers. I don't know what city you are in so you can do a distributor search on our website or call our customer service at 1-888-743-4333 to find a Ridgid supplier near you.
Pual, your K-375 will accomadate up to 100' of 3/8" cable or 75' of 1/2" cable. As for an auto feed, I assume you are looking at the autofeed unit from the K-380. There is no way to mount the autofeed to a K-375. The frame does not come up in front of the drum to mount it. I guess that with some cutting and welding, anything is possible. Good luck!