Announcement

Collapse
No announcement yet.

SeeSnake Mini Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SeeSnake Mini Question

    Purchased a new Mini SeeSnake and while running it down the sewer line with one of the guides on it will lose connection to the my cs6x versa. If I use it without the guide it will work just fine.

  • #2
    Shouldn't make any difference I would try to trouble shoot more...

    Comment


    • #3
      Make sure your camera is fully plugged into the monitor. Do the wiggle test. Send it back?

      Comment


      • #4
        The guide sounds like it's causing a natural slight flex in the spring. might be a loose connection in the camera to sonde, sonde to the wet end termination. Might even be a bad sonde that is getting tweaked.

        When it's outside of the pipe, perform a wiggle test to try and find the poor connection.

        Rick.
        phoebe it is

        Comment


        • fixitright
          fixitright commented
          Editing a comment
          Love them Wiggle Tests
      Working...
      X