Hey guys I have a clog in my bathroom sink. I tried the gles and drain cleaners and that didn't work. I took the "S" pipe off and the clog was further in or behind the wall. I have a hand kwik-spin decloger. I was able to put it in the calvanised pipe after some work about 8feet. At one point I pulled out a little hair not enought to call a clog. I ran the water and still a clog. I ran the kwik-spin in again and it seems to go in eseyer but still hard. I think when the drain goes into the wall it takes a 90 degree left when looking at the wall and then a 90 down and then in the crawl space a 90 that goes under you as you stand in the bathroom and connects to the shower drain and the thoes connect to the tolet drain. So how can I get this clog and could I push it past the shower drain and the the tolet drain and then it will get pushed becasue it is a smaller drain? Could my hand auger go up into the vent pipe insted of down when I am trying? Thanks for the feedback. I am new to the forum and a home owner for little over a year now.
No announcement yet.