Announcement

Collapse
No announcement yet.

1/8 to 1/4 quick connect

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1/8 to 1/4 quick connect

    looking for one. anyone know of a source. this is for a jetter hose.
    the only dumb question is the one that is not asked!

  • #2
    Re: 1/8 to 1/4 quick connect

    try watercannon.com
    Rod
    MT. Washington Sewer & Drain Cleaning
    Serving Berlin, NH and North Conway, NH areas
    http://unclognh.com
    http://mtwashingtonseweranddrainclea...m/default.aspx

    Charging less does not mean more call volume it just means you have to work harder to reach your goals.

    Comment


    • #3
      Re: 1/8 to 1/4 quick connect

      i did. couldn't find one there.
      the only dumb question is the one that is not asked!

      Comment


      • #4
        Re: 1/8 to 1/4 quick connect

        Originally posted by Jerad View Post
        i did. couldn't find one there.
        I may have Jerry rigged mine with a reducer and a nipple have to pull it out and look at it. I think I had this problem too now that I remember.
        have not used my 1/8 x 50 yet but it is set up to work
        Rod
        MT. Washington Sewer & Drain Cleaning
        Serving Berlin, NH and North Conway, NH areas
        http://unclognh.com
        http://mtwashingtonseweranddrainclea...m/default.aspx

        Charging less does not mean more call volume it just means you have to work harder to reach your goals.

        Comment


        • #5
          Re: 1/8 to 1/4 quick connect

          i think that is what i'm going to have to do. the nipple thing with a 1/4 qd.
          the only dumb question is the one that is not asked!

          Comment


          • #6
            Re: 1/8 to 1/4 quick connect

            Originally posted by Jerad View Post
            i think that is what i'm going to have to do. the nipple thing with a 1/4 qd.
            I pretty sure that is what I did.
            Rod
            MT. Washington Sewer & Drain Cleaning
            Serving Berlin, NH and North Conway, NH areas
            http://unclognh.com
            http://mtwashingtonseweranddrainclea...m/default.aspx

            Charging less does not mean more call volume it just means you have to work harder to reach your goals.

            Comment


            • #7
              Re: 1/8 to 1/4 quick connect

              i just got back and bought some reducers. now i just need aqua moles and a warthog and i'm all set!
              the only dumb question is the one that is not asked!

              Comment


              • #8
                Re: 1/8 to 1/4 quick connect

                as far as i know, there is no 1/8'' quick disconnect made. i use a brass bushing and then a 1/4'' quick disconnect. works perfect as the bushing is pretty much contained within the hose mip.

                do not use a reducer and nipple, unless they're rated for over 3000#.

                a bushing has been fine for years. use brass or stainless. gal will rust and plug your jetter nozzle jets.

                rick.
                phoebe it is

                Comment


                • #9
                  Re: 1/8 to 1/4 quick connect

                  there is 1/8 disconects but they want $18 for each piece. so yes i'm doing the bushing thing.
                  the only dumb question is the one that is not asked!

                  Comment

                  Working...
                  X