I was playing around with my jetter today checking different configurations etc. Anyway Picture the jetter with a 50 ft 3/8 hose leading to a footswitch then a 2ft jumper to a pressure gauge then hooked to either a 1/4" 200 ft reel or a 3/8 200ft reel. A warthog 3/8 head on either reel. The 1/4" hose reel is giving 3000psi, but the 3/8 reel is showing 2500psi. I would have thought it would have been the other way around. Is the 1/4 reel acting like a funnel to the tip that's why the psi is so much higher? Tomorrow I will be playing with a gauge at each end.
No announcement yet.
Jetter pressure readings problem