If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will be required to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
A 2 hp electric pressure washer with a cat pump on it. MTM and Landa both sell them. If you really wanted a "jetter" I would suggest the gorlitz 1500. Used mine maybe 15 times since I got it 2 months ago and plug it into the washer receptacle and have never tripped a breaker.
Would i notice the difference between the ar610 1350 psi & the ar630 1500 psi ?
Both say they come with 1/4" hose is that a plus, i keep reading 3/16"
I was facing the same question, but after reading a few hours on this forum, you find that many people are troubled with popping breakers with the 630 because it's a 19amp pull. Thus they have to power it down to keep it running. So I don't think you get anything extra, plus you save a $100.00 in cost. That said, the 630 does have an option of being set up to run hot water. Different O-rings or something AR told me. They're based by me so I went to the plant when I got mine.
What they're most likely referring to is the hose for a spray wand. I would go for the ar630. For popping breakers, run an extention cord to the washing machine and you'll be fine.
This is a good option when doing a basement line in my neck of the woods, but most kitchens and bathrooms I work on the washer/dryer is in the basement pretty far away. So you will need a heavy gage extension cord to run the amps say 100'. In my case anyway.