Announcement

Collapse
No announcement yet.

Jet Hose Pulling Ring

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jet Hose Pulling Ring

    Hi guys, I haven't been here in a long while. Good to see some familiar names still here.

    We made this recently for 1/4" quick connect couplers. I reckon it will be good for pulling liners into position or drawing cables back through conduits. I know you can just tape onto your jetter hose to pull things back, but I'm always concerned about the tape coming off. I tested this between a forklift and a ute.

    What are your thoughts?

    https://www.thejettersedge.com.au/on...ng-ring-detail

    Click image for larger version

Name:	Pulling Ring.jpg
Views:	409
Size:	47.6 KB
ID:	738628Click image for larger version

Name:	54279142_2341193052784060_2428894664057683968_n.jpg
Views:	107
Size:	31.1 KB
ID:	738630

    Bill Miller
    Attached Files
    Regards, Bill

    The definition of Insanity: "Doing the same thing over and over expecting a different result."
    Albert Einstein

  • #2
    Bill, you know us on this side of the Pacific don't use quick connects on our jetter nozzles.

    Redesign your puller head with both the 1/4" and 3/8" fip threads and you might have a taker

    Rick.
    phoebe it is

    Comment


    • #3
      Hi Rick, you guys might come on board with our short quick connectors so I'll keep making parts for them until the penny drops

      Maybe your drains are tighter than yours. If you ever come over here we will take you on the road and show you how we do drains.

      There are only a handful of plumbers over here that still screw-on. You can buy a SS ring over the counter here with a 1/4" and 3/8" F thread for the marine industry.

      If fact one of our most popular nozzles is the Bullet. This nozzle on a small jetter will do just about every choke possible.

      Click image for larger version

Name:	Bullet Nozzle16.jpg
Views:	107
Size:	13.8 KB
ID:	738651

      You have prompted me to make a section on our site with the most popular nozzles in it. https://www.thejettersedge.com.au/on...opular-nozzles

      If you like screw on nozzles, have you seen the Jetaxe head? 6 rear thrusting nozzles and one recessed forward jet that can bust through pretty well anything. See a video here:


      Facebook https://www.facebook.com/MustangNozz...4291064983160/

      Youtube https://www.youtube.com/watch?v=v2XJ1_IYEd4



      Click image for larger version

Name:	JA6R1FC.png
Views:	85
Size:	113.1 KB
ID:	738652
      Regards, Bill

      The definition of Insanity: "Doing the same thing over and over expecting a different result."
      Albert Einstein

      Comment

      Working...
      X