Announcement

Collapse
No announcement yet.

Hey K60 pro's ???

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hey K60 pro's ???

    Now that I own a K60 and it a very useful asset to my drain cleaning equipment arsenal
    We have some 6 inch clay most runs are 100 feet or less Do I need to run all IC or just need a few as a leader? I have 75 feet of the regular cable. Should I just get 75 feet of IC or a full 105 feet?
    Will the K60 loose power spinning 105 feet of IC
    Rod
    MT. Washington Sewer & Drain Cleaning
    Serving Berlin, NH and North Conway, NH areas
    http://unclognh.com
    http://mtwashingtonseweranddrainclea...m/default.aspx

    Charging less does not mean more call volume it just means you have to work harder to reach your goals.

  • #2
    Re: Hey K60 pro's ???

    with all 6'' i would use the innercore for all of it.

    the innercore will stiffen up the cable and help prevent a flip.

    but why not use your drill with that much 6''

    rick.
    phoebe it is

    Comment


    • #3
      Re: Hey K60 pro's ???

      Originally posted by PLUMBER RICK View Post
      with all 6'' i would use the innercore for all of it.

      the innercore will stiffen up the cable and help prevent a flip.

      but why not use your drill with that much 6''

      rick.
      The drill is great if I have plenty of head room Some of the basements
      are very low basments and after a short time gets ruff on the back.
      Other than that drill gets the call all the time. Like to have every option that will make every job as easy as possible.
      Last edited by UnClogNH; 01-14-2011, 12:15 PM.
      Rod
      MT. Washington Sewer & Drain Cleaning
      Serving Berlin, NH and North Conway, NH areas
      http://unclognh.com
      http://mtwashingtonseweranddrainclea...m/default.aspx

      Charging less does not mean more call volume it just means you have to work harder to reach your goals.

      Comment


      • #4
        Re: Hey K60 pro's ???

        I have 75' of innercore and 75' of regular open wound

        The most i ran was 75' inncore and 60' of reg open wound for a total of 135' and the k-60 was a little slugish.


        my typical sewers are 4" c/i leading to 6"clay anywhere from 50-100' and i mainly use all innercore with no troubles

        Comment

        Working...
        X