Hi newbie here to this site. I have a problem. I have bought a cnc jr milling machine. I built a shop for this machine. The machine runs on 120v at 15 amps. When I wired the shop I tied into the home with a 30 amp breaker to a 100 amp breaker box in the shop. The shop has only 125v pulling off the 100 amp service (no 220v). The main motor of the machine is wired to a 125v 20 amp circuit by itself. The problem I'm having is, When I turn the mill on, the motor runs for about two minutes. The O/L on the motor trips. I have turned everything off in the shop and it still happens. When I first set this mill up, I ran it for about 10 minutes with no problems. Now I have this one and can't use it. The machine is under a 1 year warrenty. But I want to make sure it's not on my end. Thanks for any help in advance..
No announcement yet.
$6,500 paper weight