Announcement

Collapse
No announcement yet.

Weil Mclain Boiler Recall Model CGS/CGI

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Weil Mclain Boiler Recall Model CGS/CGI

    For the past few years I've been selling the crap out of these boilers. A few weeks ago my supplier had a few in stock but couldn't release one to me. Now I know why.

    Weil Mclain will pay for 2 hours of labor to strip the jacket and draft inducer off to replace the flue collector. On some units the orifices will need to be replaced.

    I start my first one next week. I expect this procedure to take no less than 4 hours

    If you have one or installed one, better check the recall below

    http://www.cpsc.gov/cpscpub/prerel/prhtml08/08566.html

  • #2
    Re: Weil Mclain Boiler Recall Model CGS/CGI

    I try to stay away from them (w/m) unless a customers specs one. I have only put about 3 of them in in the last 3 years, and they were all atmospheric vents.

    Comment


    • #3
      Re: Weil Mclain Boiler Recall Model CGS/CGI

      That really grinds my gears...Whenevr there is a warranty/recall issue and the company specs a certain amount of hours for the repair, never including travel time. But obviously you have to do the repair to save face for the customer. I never really use weil mclain anyways, but i will certainly make a point of avoiding them now
      West Trail Mechanical Ltd
      Service. Commitment. Expertise.

      www.westtrailmechanical.ca

      Comment


      • #4
        Re: Weil Mclain Boiler Recall Model CGS/CGI

        Burnham

        Comment

        Working...
        X