No announcement yet.

Parts for Ridgid 300 threader

  • Filter
  • Time
  • Show
Clear All
new posts

  • Parts for Ridgid 300 threader

    Have a good deal $300 used .missing some parts. It's out of state. Will find out what's It's
    missing. Are parts hard to find?
    I can build anything You want , if you draw a picture of it , on the back of a big enough check .

  • #2
    Re: Parts for Ridgid 300 threader

    They are obtainable but sometimes not but makes a good threader.


    • #3
      Re: Parts for Ridgid 300 threader

      The 300 is an extremely good threader and will last for many many years if taken care of and are currently still in production.

      Parts are readily avaliable from ridgid and there are several after market manufacturers as well.

      Be careful of your good deal, depending an what parts are missing you might end up with more in it than what you could of bought a good used one, in working condition for.

      Chuck jaws, brushes, the micro switch in the foot pedal and main bearings seem to be what wears out first and the rear chuck seems to be the first thing broken.