Announcement Announcement Module
No announcement yet.
ridgid 1224 for conduit Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • ridgid 1224 for conduit

    can the standard dies be used for 3" conduit by adjusting the thread cut on the die head?

  • #2
    Re: ridgid 1224 for conduit

    The standard machine comes equiped to thread 1/2" - 4". The larger head will thread tapered or straight threads 2 1/2" - 4".
    Make sure you have the die head set up completly for tapered or straight (a lot of people have problems with this). There shoud be a diagram on the top of the machine to help with this.

    email me at: if you have any questions or you can call us at 503.221.8665 and we can help talk you through adjusting the head.