If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will be required to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
MAINTENANCE NOTICE: The site will be down for extended maintenance on Sunday, October 2, 2016, between 12 Noon and 6 PM Eastern. We apologize for any inconvenience!
I use a Rems gun with full size ridgid jaws. Bought a ring kit with the V1 and it doesn't fit the rems. The hole on the V1 appears to be a different size. I'm thinking of just switching the side plates on the V1 jaw.
Yup the hole is a different size. Barely and I mean barely different. Maybe 1/32 difference. The last 2 pics is the V1 plate on the bottom and you can see the little ledge. I switched the plates on an old spare jawset...cheaper then buying a whole new gun or wasting a whole ring kit.