If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will be required to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
MAINTENANCE NOTICE: The site will be down for maintenance on Sunday, 14 Feb 2015, between 9:30AM and 11:30AM Eastern. We apologize for any inconvenience!
You plug up every vent, cleanout, everything so the entire dwv system is isolated. You then put air into the system with until you get 1" w.c. You put the manometer tube through the toilet ptrap seal to get reading. This tests the wax rings, spuds, the whole schabang.
Learned something. NC does not require it as far as I know. Water test on all DWV. Pressure test on all water lines. There once was a peppermint test in the code for DWV but was not enforced and to my knowledge pretty much abandoned.
Every job we do in one county requires a final air test. They are the only County in Ohio that makes us do one on residential plumbing along with commercial. All other County's I've worked in Ohio require final air test only on commercial buildings as buy code they are required.
________ Iolite vaporizer review
Worked for an oldtimer years ago that insisted on air testing undergrounds, because if there were a leak you might not see it under the pipe. First time I ever worked for him he asked me to remove the test gear as he chatted with the inspector...I hadn't realized there was still pressure in the system as I loosened the dollar plug...both he and the inspector stood there laughing as the plug flew straight up out of the vertical stub. We have a variety of accepterd tests, Head, Air, Aquastatic , smoke and Peppermint. I've never done a peppermint test, probably never will where I work alone now.
i know the plumbers here have to have a air test on there rough in work and not sure at what psi and never heard of a final test
i have to have a hydrostatic test at 3 times the working pressure on all my heating pipes .
and the gas co does a test with the gas meter gauge and the town ship wants 3 times the working pressure . no the township past my test with a leak that did not make my gauge move in the hour long test but it did move in the 3rd hour then i fixed the leak
We have to test D.W.V at 5 psi. and water lines at 70 psi. on rough plumbing. For a final air we have to plug sewer and vent stacks and raise the water level in the toilets 1" or get 1" water column using a manometer.
________ Vaporite Solo
Have been doing work on 2 gov. jobs , Great lakes Naval Air Station and Ft. Sheridan in no. Il. Both jobs require a test , 5' head on the PVC underground and a stack test using water on the PVC W+V. Nothing on the trim other than the water on and the temps. set at the T+S valves .
I have other jobs in different villages that require 5' head on even a pit and a floor drain in PVC , 20# on gas installations, a stack test with water thru the roof and 200# hydrostatic for 2 hrs. on a ductile water service.
I really don't like the idea of testing a PVC system with air , you would know why if you ever saw one let loose , hydrostatic is much safer .
I have never been required to do a final air test on any system , did a peppermint test once , it turned out it was a dead rat in the wall causing the " sewer smell" .
EVERYBODY HAS LEAKS ,JUST DON'T HAVE YOUR"S ON MY JOB !