Announcement

Announcement Module
Collapse
No announcement yet.

Can anyone identify this mixing valve?

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can anyone identify this mixing valve?

    I have never seen this type of cartridge before. A customer sent me this picture and I have requested more pictures (handle, plate etc.) but maybe they use these in your part of the country.
    I can not tell if the picture is posting, but if it does not, have some patience and I will try another method.
    OK, success
    Attached Files
    Last edited by APHCO; 10-12-2010, 08:32 PM.

  • #2
    Re: Can anyone identify this mixing valve?

    no pic yet...

    Comment


    • #3
      Re: Can anyone identify this mixing valve?

      almost there
      Last edited by APHCO; 10-12-2010, 08:33 PM.

      Comment


      • #4
        Re: Can anyone identify this mixing valve?

        I am stumped, do you have more pics yet? It does have some similarities to a delta...

        Comment


        • #5
          Re: Can anyone identify this mixing valve?

          Not Delta. I should have more pictures tonight or tomorrow.
          I'll post as I get more info.

          Comment


          • #6
            Re: Can anyone identify this mixing valve?

            Got a picture of the trim.Whenever I take a part in to the local
            mom and pop they'll ask if I was able to get something of the trim.

            Comment


            • #7
              Re: Can anyone identify this mixing valve?

              Nibco Freedom. Available from Phoenix faucets, www.faucets.com

              part number is N1300-5-0

              If I have this right, the bottom will show two small pins and rubbers, which move in and out as you rotate the stem.

              Comment


              • #8
                Re: Can anyone identify this mixing valve?

                Hoyt Clagwell?
                "Man will do many things to get himself loved, he will do all things to get himself envied." Mark Twain

                Comment


                • #9
                  Re: Can anyone identify this mixing valve?

                  http://govex.ngap.com/product.aspx?zpid=2025671


                  J.C.

                  Comment


                  • #10
                    Re: Can anyone identify this mixing valve?

                    Thanks guys, especially J.C. & LovetheUSA, it sure looks like the Nibco. I'll verify it when she shows me the trim. That way we can have the part when we go out there.

                    What is curious is that she has bought a new cartridge 3 or 4 times and they only last for a few months. Either there is something in the water line that needs blowing out or whoever was installing the cartridges was not lubricating the "O" rings and they are tearing each time he installs it. Any other ideas why they do not last??

                    Here is the link to a useful website I found when I googled Nibco.
                    http://www.brasscraft.com/PDF/%2802%29%20Explosions.pdf

                    Thanks again

                    Comment

                    Working...
                    X