Announcement Module
No announcement yet.

tp1300 blade locks

Page Title Module
Move Remove Collapse
Conversation Detail Module
  • Filter
  • Time
  • Show
Clear All
new posts

  • tp1300 blade locks

    ok i bought a tp1300 from hd for 100 dollars, it was missing one feed roller, gear box was broken both blades and blade locks all the dust chutes called rigid and got all the new parts for FREE ! my problem is how do i install the blade locks and blades the blade locks seem to wide once all the bolts are installed and i am reluctant to tap it in with a rubber mallet, do i have to tear this thing down again and pull the roller out and slide them in from the side?

  • #2
    Re: tp1300 blade locks

    ok i think i figured it out but not sure i have the blade facing the right way any help on that


    • #3
      Re: tp1300 blade locks

      I have no experiance with this product however this may be of some help. Directly above the photo of the planer are two icons. One is for the owners manual and the other is for the parts view and list.
      Hope this helps...Ray