Announcement

Collapse
No announcement yet.

JP0610 Jointer/Planner Blades - Specifications Needed

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • JP0610 Jointer/Planner Blades - Specifications Needed

    Does anyone know the full dimensions of the blades? I know they're 6-1/8" long, but would like to know width and thickness. Looking at ordering a set of T1's if I can spec them fully. These are the two sets I have to choose from.

    6-1/8" x 5/8" x 1/8" T1-HSS Planer Knife Set of 3

    6-1/8" x 5/8" x 3/32" T1-HSS Planer Knife Set of 3

    Any help would be appreciated.
    sigpicSeldom Wrong, BUT Never in Doubt

  • #2
    Re: JP0610 Jointer/Planner Blades - Specifications Needed

    They are the same as the freud C400's (6 1/8" X 11/16" X 1/8")
    the manual tells you that you may resharpen the blades to a minimum width of 9/16" so if you have your heart set on the blades you listed the 6-1/8" x 5/8" x 1/8" T1-HSS Planer Knife Set of 3 will work but amazon has the c400 set for $20

    Comment


    • #3
      Re: JP0610 Jointer/Planner Blades - Specifications Needed

      Thanks for the info.
      I checked the site again and they have the 11/16" blades in T1. Price for theirs is $14.21. They also have them in carbide for $67.61. I'm going to try a couple of sets of the T1's first.
      Here is the link to the site Global Knives

      Just ordered 2 sets of the T-1's, cost including shipping via USPS priority mail was $35.22
      Last edited by harley130; 06-28-2008, 08:24 AM. Reason: Added info on items ordered
      sigpicSeldom Wrong, BUT Never in Doubt

      Comment

      Working...
      X