Announcement

Collapse
No announcement yet.

r4330 planer

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • r4330 planer

    looking into the purchase of this planer and had a question for existing owners... Reading the manual I see minimum specs to plane a board is 5/16th (page 17) and looking at the repeat-a-cut it goes from 1 3/4 to 1/8 (page 22). So how can it plane a board down to a thickness of 1/8 if you are not to lower the cutter below 5/16 OR use a board no thinner than 5/16?
Working...
X