Announcement

Collapse
No announcement yet.

Ts 3650 Dust Collection on the Cheap Side

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ts 3650 Dust Collection on the Cheap Side

    just wanted to post some pics for simple dust collection for TS 3650, its attachedName:  209ed58740daf07d29c4a904265084fc.jpg
Views: 1
Size:  351.8 KB to PSI 2 hp dust collector with 4" hose. "y" connection at bottom of saw 2 1/2" hose up to blade guard and adapted to 1 1/4" hose at the guard itselName:  1ae1050c9c94c5e8302f0cc4b6aa6f4a.jpg
Views: 1
Size:  308.6 KBf. Just have to squish the smaller hose at the guard to fit in the slot and it works pretty well. On the bottom 2 1/2 inch hose at factory dust colleName:  fcb07b3cb019556d369e2fe4e70943e4.jpg
Views: 1
Size:  359.1 KBction port fitted to 4" - 2 1/2" adapter got from peachtree, its the tapered one for better flow. Its not perfect but it works and helps hold down thName:  cebbc25aef2c18679d40a6ed7d64d7ac.jpg
Views: 1
Size:  357.3 KBe dust, when I use the dado blade I just put the 2 1/2" hose at front of table to catch whats coming off the blade. Now go make some sawdust.

    steve Name:  6134ecf7c0badf43d01ae1b023683625.jpg
Views: 1
Size:  330.9 KB

    ps: note broken yellow expensive magnetic feather board, my reminder to never reset feather board near spinning dado blade, parts will fly!!!!!

    This has been a great saw, had it 4 yrs bought from Woodworking show at Indy and was factory refurb got for around $300.00 I believe

  • #2
    Re: Ts 3650 Dust Collection on the Cheap Side

    I have seen a few variations of the set up you have created. Some others cut parts of the guard away to improve the airflow/collection. I'll see if I can find the link.

    Comment


    • #3
      Re: Ts 3650 Dust Collection on the Cheap Side

      Here is a link to a modified 3650 blade guard. Dust collection for contractor table saw. - by bsherman @ LumberJocks.com ~ woodworking community

      Comment

      Working...
      X