Announcement

Announcement Module
Collapse
No announcement yet.

TS 2424 Modification

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • TS 2424 Modification

    I have a Ridgid TS 2424 in my shop. This year for Christmas SWMBO is getting me a 40" Biesemeyer fence and side table for it (meep meep). In addition I am giving my dad the current side table that I have in return for one of his side wings from a newer TS3650. the 3650 wing is solid cast iron as opposed to open cast iron. The one other difference is that the 3650 wing has a beveled front edge. My saw however does not have the bevel. I am wondering if there is a way that I can add the bevel to the front edge of the saw? I was thinking that I could rough the bevel with a hand grinder and files and then sand it smooth with a die grinder. Does anyone know if this will work, or if there is another way? Or is this just a bad idea that could lead to a messed up saw. Any advice or suggestions would be appreciated.
    -Rob<br /> <a href=\"http://home.comcast.net/~robritch/\" target=\"_blank\">http://home.comcast.net/~robritch/</a> <br />Damn, I hit the wrong nail again. Ouch that hurts
Working...
X