Announcement Announcement Module
Collapse
No announcement yet.
JP06100 Table Sag Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • JP06100 Table Sag

    The infeed and outfeed tables both need minor adjustment. The outfeed table in particular needs raising on the far end. Does anyone know how to get the two tables coplaner?

  • #2
    Do the Gibb adjustment on page 25 of the owners manual

    JP610 manual

    If that does not do it call tech support 1-866-539-1710 you may have an improperly machined table or base dovetail

    Comment


    • #3
      Thanks,

      After I made the original post, I went through the gib adjustment again and that cleared up the problem.

      Comment

      Working...
      X