Announcement

Collapse
No announcement yet.

R3120 Jig Saw

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • R3120 Jig Saw

    I recently purchased the R3120 Jig Saw and I am not certain that I am inserting the blade correctly. I am using a Bosch-type blade. The handle which opens/closes the blade clamping mechanism does not return to the same position as it is in when there is no blade inserted. Is this correct? This is same situation when I insert any of the blades that Ridgid provided with the kit. I believe that I am inserting the blade as deep as it will go in the holder.
    Thanks in advance for any assistance.
    Canuck

  • #2
    Make sure that you open the spring-loaded clamp holding the blade as far as you can, this should allow you to insert the blade as deep as it needs to. I had a similar problem when I first started swapping blades in the saw.

    Comment


    • #3
      Thanks.
      I think that I'm getting the hang of it. This is one great saw.
      Cancuk

      Comment

      Working...
      X