If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will be required to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
MAINTENANCE NOTICE: The site will be down for maintenance on Sunday, 29 November 2015, between 12PM (noon) and 4PM Eastern. We apologize for any inconvenience!
Ridgid makes about 4 or5 rollgrovers. the smaller ones are powered by a handrachet and the bigger ones by the 700 power drive, the 300 machine, and the 1224 machine. what they do is put a groove around a pipe so you can put two pipes together with a coulpling. if in good working order i would say the small one would fetch anywhere around 100 to 330 bucks. the bigger ones in good shape anywhere from 500 to 1500 maybe, the 914 in place rollgroover goes for about 700 new.the 916 groover which connects to the 300 machine goes for about 800 then the big boy the 918 goes for about 2700.00. the 925 i can not find in the catalog.