If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will be required to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a Ridgid 12 miter saw and want to add a laser device to it. It appears to be as simple as bolting one on to the blade. Is this true and if so where do you find such a device. I did not see anything at the Ridgid site.
Mike the link that Dave gave you is a real good laser for your saw. I dont like the idea of the ones that mount on the blade because you have to have the saw running to set the laser line. The Laserkerf shows the laser line on the board when the saw is not running(much safer).