Announcement Announcement Module
Collapse
No announcement yet.
Old Craftsman Table Saw Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Old Craftsman Table Saw

    I am trying to find a fence for an old Craftsman table saw. The original manufacturer was Emerson Electric Tool Co. The model number is 113.298051. The part number for the fence is 62773. Can any one help me?

  • #2
    Re: Old Craftsman Table Saw

    http://www3.sears.com/ type in 62773 in the "Type in your part number" box (box 3). Comes up with a Fence. No pictures, and scarcely any text, but it may just be what you're looking for. Unfortunately....it's listed as unavailable. There's a few items on Ebay for that saw. You might be able to find it there.
    Last edited by VASandy; 04-13-2007, 12:28 PM.
    I put it all back together better than before. There\'s lots of leftover parts.

    Comment


    • #3
      Re: Old Craftsman Table Saw

      Are you looking for that exact fence? If not and this is a contractor style table saw most after market fences should fit it. You might have to drill a hole or two to mount one but that shouldn't be a big problem.
      Teach your kids about taxes..........eat 30 percent of their ice cream.

      Comment


      • #4
        Re: Old Craftsman Table Saw

        Your saw is a US made Emerson saw. If it's 27" deep, then just about any aftermarket fence should fit. The Delta T2 was recently on sale for ~ $127, and is one of the better values out there IMO. Check Ebay for other deals, or possibly the exact model you're looking for.

        Comment


        • #5
          Re: Old Craftsman Table Saw

          If you want the original, try here might have a chance. If you can't find it in the sale area, try going into the forum there. They had the owners manual for my 1958 craftsman radial arm saw, couldn't believe it. Good luck...

          http://www.owwm.com/Store/shop/
          Great Link for a Construction Owner/Tradesmen, and just say Garager sent you....

          http://www.contractorspub.com

          A good climbing rope will last you 3 to 5 years, a bad climbing rope will last you a life time !!!

          Comment


          • #6
            Re: Old Craftsman Table Saw

            I had an old Craftsman Bench Model TS and couldn't find a fence, and the price of an aftermarket fence for this saw just didn't work for me. (that's why I have my 3650, I love that saw) My fence had a handle that scewed to tighten and lock the fence. I was able to repair the original fence with some treaded rod and new nuts.

            Comment

            Working...
            X