I've seen some really great stuff on the forum, some of which I've been able to incorporate into my small shop. I thought I'd share some implements from my shop in hopes that it would encourage others to do so. We're always looking for new ideas and a better way to do things. I included the drill press table that I built a couple of years ago. I also have a pretty simple fix for a coping sled. I just attached a piece of oak to a miter gauge, pushed it into coping bit to create a zero clearance backer and then added the Ridgid clamp down attachement. It works great and holds the stock steady when I'm building my cabinet doors. Lastly, shop space is limited so I use every inch that I can. I bolted some 2x6's to the joists in the ceiling, screwed some 2x4's into the sides of them and them ran some pipe through holes I drilled in the 2x4's. This set up holds all of my sheet goods. The section on the right holds the long stuff and the section on the right holds everything 4' and under. If you've got some great stuff/ideas in your shop that you think are unique to your set up let us know.
No announcement yet.
Best shop additions...let's see them!Page Title Module
Move Remove Collapse