Announcement Announcement Module
Collapse
No announcement yet.
lower bandsaw wheel Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • lower bandsaw wheel

    Without slamming this saw too,too bad..the lower wheel is out of round, thinking of having it milled, as it is one of many I have tired.

    However, the slot key is frozen - any suggestions on getting it out so I can remove the _)(_(& wheel?

  • #2
    Re: lower bandsaw wheel

    Have you tried tapping on the axle in order to break the 'seal' ? It needs to be an abrupt, solid rap. Don't get carried away but little taps won't cut it. If this makes you uncomfortable don't do it. Call a friend who is mechanically inclined who will have an experienced 'feel' for this. I wonder if your wheel is out of round or the hole is drilled off center. Just a thought.
    Later,
    Chiz

    Comment

    Working...
    X