Announcement

Announcement Module
Collapse
No announcement yet.

DC question

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • DC question

    Does anyone here have a Ridgid DC system. I have seen a 1 1/2 hp model at Cummings for $199.00 I believe and was curious about it. I am in the market for a DC system and have been leaning toward HF's 2 hp model. The Ridgid is prettier but I'm not impressed by pretty, just results
    I came...<br /><br />I saw...<br /><br />I changed the plans.

  • #2
    I have the HF DC. It works very well for me. Try to get it on sale and with one of their $10 coupons. Take the money you save and invest in some 1 micron filter bags. You'll be glad you did. I am currently running the DC on my TS, BS, Planer, and router table.
    Can someone help me install this blade!!!!!!

    Comment


    • #3
      After much research, I opted for the 2 hp. Shop Fox. It was a toss up between that and the Grizzly 2hp. (Both with .3 micron bags). Both are dual voltage motors, which, when run on 240v. only draw about 6 amps....more motor life!

      Comment


      • #4
        I have the Ridgid DC and it work well for my temporary shop setup. For the clearance price $129 a year ago I could not pass it up.

        Roverdisco...where do you get your 1 micron bags at?

        Scott

        Comment

        Working...
        X