Announcement

Announcement Module
Collapse
No announcement yet.

Table saw cove...

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Table saw cove...

    I set up a diagonal fence on the 3650 and cautiously ran a cove through a board on both edges... I then cut the board in-two and mitered the ends. (This will make up the roof of the gnome-home I'm making for my mother). Any ideas of how to reinforce the joint at the peak of the roof... should glue alone be okay??? Note: I have no biscuit joiner yet...

    Here's a pic of the coves...
    and the gnome... lol...



  • #2
    Re: Table saw cove...

    Originally posted by funeralguy82 View Post
    I set up a diagonal fence on the 3650 and cautiously ran a cove through a board on both edges... I then cut the board in-two and mitered the ends. (This will make up the roof of the gnome-home I'm making for my mother). Any ideas of how to reinforce the joint at the peak of the roof... should glue alone be okay??? Note: I have no biscuit joiner yet...

    Here's a pic of the coves...
    and the gnome... lol...

    Use splines on the inside of the corners:
    Click image for larger version

Name:	368a52d2734925976ef8b795032938a3.jpg
Views:	1
Size:	27.4 KB
ID:	2814
    Poplar Branch Wood Crafts

    Comment


    • #3
      Re: Table saw cove...

      I'll have to try a spline... and cut molding to hide it...

      Comment

      Working...
      X