Announcement

Collapse
No announcement yet.

Ts3650 Outfeed Table

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ts3650 Outfeed Table

    Does anyone know if "HTC HOR-1038U Table Saw Outfeed Roller Table" (37" x 31") could fit our TS3650 table saw?

    see below link:
    http://www.htcproductsinc.com/outrs.html

    Thanks.
    Patrice.

  • #2
    Re: Ts3650 Outfeed Table

    I don't know the answer to your question but you could fill out this form and see what they say. Just post your question in the comment box at the bottom of the form.
    ================================================== ====
    All of us could take a lesson from the weather. It pays no attention to criticism.

    Comment


    • #3
      Re: Ts3650 Outfeed Table

      Looks like it maybe just for cabinet saw. If you tried to fit this on the 3650, the motor will probably interfere with it's operation.

      Comment


      • #4
        Re: Ts3650 Outfeed Table

        Well, I am not so sure since by the drawings on above link (see 1st post) it seems that there is enough space for the motor....I will follow Badger's advise and send the form in...

        I was just curious if anyone here on this forum knew the answer.

        Comment


        • #5
          Re: Ts3650 Outfeed Table

          Please let us all know what their answer is.
          ================================================== ====
          All of us could take a lesson from the weather. It pays no attention to criticism.

          Comment


          • #6
            Re: Ts3650 Outfeed Table

            I called them: it won't fit contractors saw. The motor has to be inside to work properly.

            Comment


            • #7
              Re: Ts3650 Outfeed Table

              Hi Dave - I had to call them since they never reply my e-mail.....
              During my phone call I was told that it won't fit our TS3650 contractors saw. The motor has to be inside to work properly. Sawhorse, you're rigth. Dam. It looks so nice that outfeed table.

              Comment


              • #8
                Re: Ts3650 Outfeed Table

                Hi Guys - I got this e-mail today.
                It seems the NEW model will fit, but I am not convinced....

                From: "Sales" <sales@htcproductsinc.com>
                To: "HTC - ContactUs" <patrice_pinto@msn.com>
                Subject: RE: Enquiry
                Date: Mon, 14 Apr 2008 13:30:59 -0400








                Patrice,

                To the best of my ability, with our new adjustability with our new outfeed roller table I see no reason why it wouldn't fit your Tidgid TS3650. We just made a new and improved model it's our HOR1038 there is no U on the end of it, if you order one and it does not have 5 yellow stickers on the box saying new and improved all the way around the box then it will not be adjustable and its not new. Make sure it is the new model when you order it. The old model has a U at the end of it.



                Bonnie Grenke

                Customer Service





                HTC Products Inc./Sales
                332 E. Lincoln Ave.
                Royal Oak, MI48067
                800-624-2027
                248-399-6185
                248-399-8419 FAX

                www.HTCProductsInc.com

                Comment


                • #9
                  Re: Ts3650 Outfeed Table

                  I sent another reply to the that company with our TS3650 drawings and request to go thru their Tech deparment to assure it would fit....

                  Comment


                  • #10
                    Re: Ts3650 Outfeed Table

                    Any reply back yet? Thanks...

                    Comment

                    Working...
                    X