Announcement Announcement Module
Collapse
No announcement yet.
Another Freud Glue Line Rip Blade Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another Freud Glue Line Rip Blade

    I recently picked one up as I was having a very hard time with glue-ups on cutting boards I am trying to make. I was getting seems where you could see light shinning through in spots and thats not good. Each time I "tried" to fix it and more problems arose. When I bought the wood I had one edge and face jointed so I knew I had a good starting point. After reading a thread on this forum about the blade I decided to try it. I was completely amazed at the difference it made, this blade is a keeper.

    It should be noted that I re-did the alignment on my saw since I know this was factor in the issues I was having. With the saw dialed as best I can and the glue-line rip blade I will now be able to crank a bunch of these cutting boards without contributing to the waste pile. Its a good day.
    Last edited by Pez; 04-12-2008, 08:39 AM.

  • #2
    Re: Another Freud Glue Line Rip Blade

    Good to hear its working out. Woodworking it far more relaxing when the tools work as expected

    Comment

    Working...
    X