Hi, I bought my saw about 3 months ago at Home Depot. I used to own a woodworking business. I have changed professions and downsized all my equiptment and chose the TS 2424 on the basis of it's simplicity, price, mobility and warranty. I have been very happy with the quality of the saw for the price. I shifted the fence to the right to get a 36" cut on the right side of the blade. I am in the process of putting some angle iron on the sides of the sheet metal housing parallel with the blade to add an outfeed table and have found that one side is slightly warped and the housing is not square with the saw table. Would this be covered under warranty and if so how would I get this taken care of?